Dimensional Measurement

Every dimension is crucial

to the functionality of a product

Our QC inspection also involves extensive use of specialized equipment to monitor the dimensions and profile of our products. In the hands of our QC specialists, these tools can produce high precision measurement, which is crucial in our effort to ensure product quality.

Coordinate Measuring Machine (CMM) are used to measure the geometry of any physical object. CMM can incorporate different types of probes including mechanical probes and non-contact probes (optical, laser and white light).
The most common type of CMM is the 3D “bridge” CMM. These machines often have a computer-controlled probe that moves along three axis (X, Y and Z). The machine can record the position of sensor points to produce a 3D image, which describes the surface areas of the scanned part. These images can be used in a digital environment for further analysis.

Las Máquinas de Medición de Coordenadas (MMC) se utilizan para medir la geometría de cualquier objeto físico. Las CMM pueden incorporar diferentes tipos de sondas, incluyendo sondas mecánicas y sondas sin contacto (ópticas, láser y de luz blanca). El tipo más común de MMC es la MMC de "puente" 3D. Estas máquinas suelen tener una sonda controlada por ordenador que se mueve a lo largo de tres ejes (X, Y y Z). La máquina puede registrar la posición de los puntos del sensor para producir una imagen 3D, que describe las áreas de superficie de la pieza escaneada. Estas imágenes pueden ser utilizadas en un entorno digital para un análisis posterior.
CMM Inspection
MMC automático para la inspección
Automatic CMM for inspection
MMC automático para la inspección
Automatic CMM for inspection

FaroArm is a portable CMM machine that is manually controlled and allows unrestricted multi-axis movement. These machines can be deployed in a wide range of work environments and perform tasks beyond the limitations of a typical CMM.

Medición óptica
Optical measurement
Inspección del Faro por Omnidex
Faro arm inspection by Omnidex
Inspección del Faro
Faro Arm Inspection

Also called Optical Comparator or Profile Projector, this device draws on the principles of optics for dimensional inspection. The magnified silhouette of a part is projected on a screen and measured against the prescribed limits. It is a cost-effective non-contact measurement solution with high precision. We use a range of High Precision Optical Measuring Profile Projector and Automatic Video Measuring Machines to measure the dimensions and geometry of our products.

Optical Measurement Projector
Optical Measurement Projector

A height gauge is used to accurately measure the height of parts. We use a combination of manual and digital Height Gauge for height Measurement.

Medidor de altura digital en la placa de la superficie
Digital height gauge on surface plate
Medidor de altura digital en la placa de la superficie
Caliper height gauge on surface plate
Metalurgia con un medidor de altura
Metalworking with a height gauge

All surfaces have tiny irregularities on them, which are often very small and hard to detect. With the use of specialized Surface Roughness Testers, we can measure the roughness of any surface and provide quantitative data for our QC analysis.

Todas las superficies tienen pequeñas irregularidades, que a menudo son muy pequeñas y difíciles de detectar. Con el uso de probadores de rugosidad de superficie especializados, podemos medir la rugosidad de cualquier superficie y proporcionar datos cuantitativos para nuestro análisis de control de calidad.
Operator inspection by Roughness Tester
Inspección del operador con el Probador de Rugosidad
Operator inspection by Roughness Tester
Roughness Test Equipment

Every component has its own importance in a design, and we should never overlook a humble screw or nut. We use a series of Go/no go Thread Pitch Gauges, Plug Gauges and Ring Gauges to ensure every thread profile is up to spec.

Medidores de rosca externa
External thread gauges
MediMedidores de rosca Go/No-Go
Go/No-Go thread gauges
Medición con medidores de rosca
Thread gauges Measuring

Pin Gauges and Plug gauges are tools used for measuring the diameter of a hole. They can also be used as reference tools for geometric deviations measurements.

Medidor Pasador
Pin Gauges
Medidor Pasador
Pin Gauges
Medidor Pasador de cerca
Pin Gauges Close Up

A Feeler Gauge is a measuring tool composed of a set of folding metal strips with varying thickness. They are used to measure gap widths and ensure clearance between parts.

Palpador Indicador
Feeler Gauge
Medición con Calibre Fio
Feeler Gauge Measurement
Medición con Calibre Fio
Feeler Gauge Measurement

We utilize a range of digital Thickness Gauge to measure the thickness of sheet material. We also have specialized coating Thickness Gauges that allow non-destructive coating thickness measurement of non-magnetic coatings.

Caliper measurement
Midiendo el detalle del acero con el calibre digital Vernier
Measuring steel detail with digital Vernier Caliper
Dispositivo para medir el grosor de un metal
Device for measuring the thickness of a metal

Conventional “tip and anvil” style Thickness Gauges can only measure smaller parts. When it comes to measurement on larger substrates such as pressure vessels, tanks or industrial machines, we often use the more versatile Ultrasonic Thickness Testers.

Prueba Ultrasónica
Ultrasonic Test
Inspección espesor hierro fundido mediante una prueba de espesor ultrasónica
Inspection thickness cast iron by ultrasonic thickness test

Some products may require special testing methods, with no proprietary QC equipment available on the market. In these cases, our engineering team will create our own solution for the project.

Housing Checking Gauge 1:
Mainly used to ensure housing part structures are in the right positions according to the requirements.

	Medidor de Control de Productos con Carcasa
Housing Products Checking Gauge
Medidor de Control de Productos con Carcasa
Housing Products Checking Gauge
Medidor de Control de Productos con Carcasa
Housing Products Checking Gauge

Housing Checking Gauge 2:
Mainly used to validate the surface on a housing part is perpendicular to the referencing axis as stated in the requirements.

	Medidor de Control de Productos con Carcasa
Housing Products Checking Gauge
Medidor de Control de Productos con Carcasa
Housing Products Checking Gauge
Medidor de Control de Productos con Carcasa
Housing Products Checking Gauge

Idle gear and pinion gear checking gauge:
These gauges are used to ensure gear profile are up to specification.

Idle gear and pinion gear checking gauge
Idle gear and pinion gear checking gauge
Idle gear

We are always ready to help with your latest project.

Contact our Customer Service and let us know how we can help to catapult your next project to success.

Years In Business
Years of ISO 9001 Certification
Manufacturing Processes
Qualified Engineers
Combined Years of Expertise

Contact us

Phone nos.:
    Asia Pacific, South America, Africa and rest of the world:
   +86 20 8388 7080
   UK: +44 (0)808 123 0080
   USA/Canada:  + 1 (800) 967 2110

Email

Copyright © 2021 OmnidexCN. All rights reserved.