Understanding In Circuit Testing (ICT):
A Reliable Method to Identify Manufacturing Faults

Understanding In Circuit Testing (ICT): A Reliable Method to Identify Manufacturing Faults

Iron vs steel: What are the Differences Between Metal, Iron and Steel

What is In Circuit Testing (ICT)?

There are a number of complex tasks involved in the manufacturing of electronic assemblies, all of which can go wrong. In order to ensure quality standards are met, the fabrication of the printed circuit board assembly (PCBA), the placement of components on the board, as well as the quality of the parts themselves must be tested. 

In addition to being time-consuming, the verification process can be expensive. In circuit testing (ICT) can be an effective tool for OEMs and contract manufacturers to consistently meet defined parameters during production runs.

Industrial manufacturing services

Our mission is to provide the most appropriate solution for your next project, regardless of whether you are an emerging start-up company or a blue-chip corporation.

Learn more about our other manufacturing processes or services by contacting us.

Various PCB specifications can be designed depending on the application requirements in various industries. The designs range from simple with a single layer to complex with multiple layers assembled by soldering connections to hundreds of components. The result is a greater chance of defects and faults at the component level. Testing is therefore indispensable.

Testing ensures that the PCBs are in good condition by detecting many defects, including incorrect or missing components, defective solder joints, and short circuits among others. The most popular and widely used PCB testing method is In Circuit Testing (ICT). In this article, we will explore how ICT works.

Iron vs steel

In Circuit Testing for Medium-High Volume PCBs: A Cost-Effective Method

PCBs are widely recognized as being the most cost-effective to test in-circuit. This is because its test time tends to be less than one minute, and the cost per unit is lower. The ICT method is more reliable than other testing methods since it tests each PCB component individually to identify:

pcb testing_in circuit Testing_ICT test_electronics manufacturing services__Omnidex
Electronics Pcb Testing

It is possible to perform ICT using a bed-of-nails test fixture or by using a flying probe set up to detect individual defects.

The On and Off of ICT

There are generally two parts to this test, namely, power-off tests and power-on tests. A power-off test detects shorts between traces and component leads, resistor values, and the presence of passive and analog components. In addition, this test ensures the jumpers/switches are set correctly.

Difference between Iron and Steel

In contrast, power-on tests are conducted to detect bad or incorrect analog and digital components, capacitance and inductance values, transistor beta values, and digital component timing. Besides these, power-on test also performs all the other tests aforementioned for power-off test.

ICT Advantages

The ICT process identifies potential defects in individual components and the components’ connections with a substrate. Additionally, the test can be run without power being applied to the unit under test, which makes it popular.

Following the test, a report containing points relating to coverage may be generated, including the list of components that have been tested, those that have been partially tested, and those that have not been tested, the type of fixtures used, and the software used. The PCB fabricator can carefully analyze the report after the testing has been completed and make changes as necessary.

Iron vs steel

Hardware Used in In-Circuit Testing

During the test of each finished product for proper functionality, ICT uses test fixtures, commonly called “bed of nails” because they contain multiple contact pins. Engineers determine in advance how the bed of nails will access the critical test points of a printed circuit board assembly.

When a test point on the PCB assembly is in contact with specific pins on the test fixture, they will be compressed, either manually or by an induced air vacuum.

What role does software play in ICT?

Engineers who are intimately familiar with the product’s built-in parameters and intended function are ideal candidates to develop the software required to execute the test on the assembly. Testing for potential problems is carried out by powering on/off certain areas, measuring electrical parameters, and identifying any anomalies.

In-circuit Testing Measurable Factors

In addition to increasing quality, ICT allows for better line speeds by automating the testing process. In order to maintain design standards, manufacturers need to be able to check each finished product quickly and consistently. Checks for regular configurations of the ICT include the following parameters and faults:

1. Part placement

It is still common for mistakes to occur in the manufacturing process today, despite today's high standards and heavy reliance on automation. Quality inspection is routinely performed on ICT products.

2. Soundness of printed circuit boards

During assembly, individual traces of PCBs are more susceptible to damage as they become more densely populated. ICT examines the PCB board for any short circuits or open circuits and isolates them.

3. Condition of the component

The effects of electrostatic discharge on an IC may not be immediately noticeable during standard product operation tests. The technicians can locate and repair damaged components by measuring their reaction to specific voltages and currents.

4. The electrical requirements

The ICT can easily certify that the final product meets design specifications by measuring its resistance and capacitance.

Iron vs steel

Electronic products that are mass-produced can be tested to make sure they are operating properly using ICT. The in-circuit testing method is not a perfect method of testing, but it is one of the most efficient methods of producing large quantities of products that work as designed.

Iron vs steel

Omnidex CN: Electronics Manufacturing Services

With more than 78 manufacturing processes, including electrical and electronics manufacturing, metal casting, metal fabrication, precision CNC machining, plastic fabrication, metal finishing and more, etc.,  in addition to our 200+ sub-contractor partners, OmnidexCN is able to support every project or component production regardless of the development stage or mass production.

To know more about our electronics manufacturing services for your next project, you may contact us directly HERE.

Like this article?
Share on Facebook
Share on Twitter
Share on Linkdin
Share on Pinterest

We are always ready to help with your latest project.

Contact our Customer Service and let us know how we can help to catapult your next project to success.

Years In Business
Years of ISO 9001 Certification
+
Manufacturing Processes
Qualified Engineers
+
Combined Years of Expertise

Our Locations

One-stop International Manufacturing Services

China Office

Vietnam

United Kingdom

Copyright © 2022 Omnidex CN. All rights reserved.